Thursday 28 May 2015

Restoration Hardware Inspired Dresser Set


 
A couple of new pieces to show today. I don't use black very often, I can probably count the total number of black pieces I have done on less than both hands.  But after having done the Restoration Hardware Inspired black mirrors HERE and nightstands HERE, I thought I would try the look on these very unique dressers (which is part of the matching set for those nightstands.)


 This is the picture that inspired me!

 
I succumbed to an impulse purchase with this set.  Once I got them home I had a 'what was I thinking?!' moment and they just sat in the corner for a while.  I then thought I would just turn around and sell them as I wasn't feeling too inspired by them and I was busy working on other things like the three piece purple French provincial set for a friend that I forgot to snap pictures of. Doh! Ive asked her to send through some pictures of them in their new home. The purple was pretty cool.
 
 
After a few weeks, I didn't have any hits on them, so I decided to paint them up.  I sanded everything really well and I even used a bit of a deglosser (liquid sandpaper) on the curvy legs and drawers and I have to say that I was pleasantly surprised with how great it worked and how user friendly it is. I will definitely use it again on hard to sand detailing.
 

 
I decided not to prime as I didn't want bits of gray or white sticking out from under the distressed parts.  I had a large gallon of Dulux Diamond Black in semi-gloss on hand, but I didn't want a semi gloss look, so instead I grabed my plaster of paris and whipped up some chalk paint.
 

 
I sprayed on two coats and then sanded. And my word did it need sanding.  It dried very gritty, in fact the piece could have been used to sand another piece!
 

 
I sanded everything smooth, and then I wet sanded everything to get it even smoother.  This step took F-O-R-E-V-E-R and left me covered in wet black sanding dust.
 

 
I then had a decision to make.  Should I use wax as a protective topcoat, or should I use a wipe-on-poly or tung oil.  I have not been overly impressed with how wax turns out on dark pieces.  It dries extremely streaky and produces a really uneven finish.  I decided to go with the wipe on poly.

 
 
I wiped on two thin coats, just enough to seal the porous chalk paint.  It turned out good, although you can still tell it is hand-rubbed (as opposed to a perfect factory finish).  I distressed all of the edges prior to this step, and in hindsight I wish I had distressed a little more as it is a bit too subtle.

 
The tallboy got the same treatment.  I used oil rubbed bronze on the original hardware to keep everything dark. It was originally a garish gold and would have made the pieces look too Asian inspired which wasn't the look I was after here.

 
 
 
 
Here are the originals.
 
 

LINKING UP TO MISS MUSTARD SEED'S FURNITURE PARTY!

2 comments:

  1. This is gorgeous. I'm not sure I've ever seen a set like this. Great bones!

    ReplyDelete
  2. Loving your gorgeous pieces!

    ReplyDelete